barbed roller 20 inch for Self
Barbed rollers are made of corrosion resistant nylon material. (Can wash and clean the barbed roller With thinner solvent) where the barbed rollers can be removed for cleaning
The briar of the briar roller is a smooth groove of teeth. Can be rolled to spread the color across the area to help adjust the level of smoothness and air bubbles, making the surface of the epoxy floor, PU floor or Self Leveling plastering work evenly smooth.
The structure of the barbed roller is made of hard chromium coated steel. To prevent rust
The handle of the barbed roller is designed to be ergonomic and ergonomic. And there is a hole in the handle of the barbed roller For use in extending long-handled sticks To roll in the surface Of epoxy floor, PU flooring thoroughly
Barbed roller usage
After finishing the trowel with a trowel for installing Epoxy Floor Self Leveling, those who are not skilled or install the floor by themselves. Often trowel the trowel and then the joints of the trowel while troweling Which does not leave even the expert technician Which you can use barbed rollers To spread the color across the area to help adjust the level of smoothness and use a long stick to the handle to roll in a position that has been cut and placed in a deep position. Then noticed that it wasn’t smooth enough To roll on a flat surface until you are satisfied
After troweling with a trowel for installing Epoxy Floor self-leveling, sometimes, once the coating has been observed, bubbles will appear. From deteriorated cement mortar or non-standard cement mortar Then can use a roller to blend the color into the hole To close the bubbles that can occur